skip to primary navigationskip to content

Cambridge Graphene Centre

Research Centre on Graphene, Layered Crystals and Hybrid Nanomaterials

Studying at Cambridge

 

Graphene-based terahertz absorbers

last modified Sep 14, 2017 10:19 AM
Graphene Flagship researches create a terahertz saturable absorber using printable graphene inks with an order of magnitude higher absorption modulation than other devices produced to date.

Graphene Flagship researches from CNR-Istituto Nanoscienze, Italy and the University of Cambridge, UK have shown that it is possible to create a terahertz saturable absorber using graphene produced by liquid phase exfoliation and deposited by transfer coating and ink jet printing. The paper, published in Nature Communications, reports a terahertz saturable absorber with an order of magnitude higher absorption modulation than other devices produced to date.

A terahertz saturable absorber decreases its absorption of light in the terahertz range (far infrared) with increasing light intensity and has great potential for the development of terahertz lasers, with applications in spectroscopy and imaging. These high-modulation, mode-locked lasers open up many prospects in applications where short time scale excitation of specific transitions are important, such as time-resolved spectroscopy of gasses and molecules, quantum information or ultra-high speed communication.

“We started working on saturable terahertz absorbers to solve the problem of producing a miniaturized mode-locked terahertz laser with thin and flexible integrated components that also had good modulation.” said Graphene Flagship researcher Miriam Vitiello from CNR-Istituto Nanoscienze in Italy.

Graphene is a promising saturable absorber as it has intrinsic broadband operations and ultrafast recovery time along with an ease of fabrication and integration, as first demonstrated in ultra-fast infra-red lasers by Flagship partner University of Cambridge. In the terahertz range, the present paper exploits graphene produced by liquid phase exfoliation, a method ideally suited to mass production, to prepare inks, easily deposited by transfer coating or ink jet printing

“It was important to us to use a type of graphene that could be integrated into the laser system with flexibility and control.” said Vitiello “Ink jet printing along with transfer coating achieved that.”

Using mode-locked lasers to produce ultra fast pulses in the terahertz range can have interesting and exciting uses. “These devices could have applications in medical diagnostics when time of flight topography is of importance – you could see a tumour inside a tissue,” said Vitiello.

Frank Koppens, of the Institute of Photonic Sciences in Spain, is the leader of the Graphene Flagship’s Photonics and Optoelectronics Work Package, which focuses on developing graphene-based technologies for imaging and sensing, data transfer and other photonics applications. “This is a new discovery with immediate impact on applications. Clearly, this is a case where graphene beats existing materials in terms of efficiency, scalability, compactness and speed,” he said.

Andrea C. Ferrari, Science and Technology Officer of the Graphene Flagship, and Chair of its management panel added "It is an important milestone to have demonstrated that easily produced and printable graphene inks can also serve to enable ultrafast lasers in the terahertz range. Since the Flagship’s inception, a variety of lasers have been made covering the visible to IR spectral range, but now the important THz range, with applications in security and medical diagnostic, is finally made accessible by graphene, starting yet another possible application field." 

Further Reading

Terahertz saturable absorbers from liquid phase exfoliation of graphite. V. Bianchi, T. Carey, L. Viti, L. Li, E. H. Linfield, G. Davies, A. Tredicucci, D. Yoon, P. G. Karagiannidis, L. Lombardi, Tomarchio, A. C. Ferrari, F. Torrisi, M. S. Vitiello; Nature Communications 8, 15763 (2017).

RSS Feed Latest news

Dr Luigi Occhipinti joins the Cambridge Graphene Centre

Feb 01, 2018

The Cambridge Graphene Centre welcomes Dr Luigi Occhipinti as Deputy Director and Chief Operating Officer.

Zero Gravity Graphene Promises Success in Space

Feb 01, 2018

In a series of exciting experiments conducted in November and December, Cambridge Graphene Centre researchers experienced weightlessness testing graphene’s application in space.

State-of-the-art new facilities open at Cambridge Graphene Centre

Nov 23, 2017

The Cambridge Graphene Centre is pleased to announce the opening of two new high-specification facilities: cleanrooms for precision fabrication of electrical and optoelectronic devices and a dryroom for large-scale battery prototypes.

View all news